Panel first, then measurement
A cold electric heater in Rancho Santa Clarita is often the breaker. A breaker that holds while the tank stays cold points inside — element, thermostat or high-limit cut-out. One that trips straight back points to a shorted element or a wiring fault.
Lukewarm rather than cold is its own signature: on a two-element tank, a failed upper circuit leaves the top of the tank unheated while the lower element warms what it can, which never reaches a shower temperature.
What gets tested
Resistance and continuity on each element, voltage at the thermostat, the high-limit switch, the wiring and connections at the heater, and the breaker sizing. The circuits are tested separately because the symptoms overlap until they are measured.
Safety and scale
The breaker comes off before covers are opened and the tank is drained below the element before it is disturbed — a dry element powered for a minute is scrap. On water at 240 mg/L of calcium carbonate, elements also scale and fade in efficiency before they fail, which is why recovery drops gradually.