The first five minutes matter more than the technician
Most of the damage from a failed heater happens while someone stands looking at it. Water under a tank soaks into the slab, the framing and the drywall behind it, and a pan without a drain simply fills.
Close the cold inlet. The valve on top of the tank, usually a gate or ball valve on the cold line. If it will not turn, the main shut-off for the property is the next option.
Turn the fuel off. Gas: the valve on the supply line at the heater. Electric: the breaker. A heater that keeps firing with its water gone will destroy its own elements or overheat its tank.
Move what is stored around it — boxes, paint, anything on the floor within reach of the water.
Do not cap the relief valve to stop a drip. It is doing its job, and plugging it is how tanks become projectiles.
What can be handled in the morning
No hot water with no leak and no gas smell is usually a part failure, and a part failure at ten at night is not worth an emergency rate. Ring in the morning, or ring now for advice if you are unsure. If the pilot will not stay lit, if the breaker trips again immediately, or if the tank is cold and the display is dead, waiting a few hours costs nothing but a cold shower.
What must not wait
- Water that is running and will not stop.
- Any smell of gas — leave, then call the gas utility from outside.
- A commercial kitchen or laundry with no hot water during operating hours.
- An electric heater that has tripped repeatedly with a burning smell at the panel.
Around the clock means the phone, not a promise
Calls are answered 24 hours a day, seven days a week. What that guarantees is a conversation and advice on making the property safe; the visit itself is arranged with you on that call, with a time you have actually agreed to.