The space decides more than the price
Installing in The Oaks starts with the location. A garage slab gives room and a simple vent path; a closet gives neither, and the clearances to combustibles, the flue rise and the access for service all shrink the list of units that can legally go in.
Then demand: how many people draw hot water, how many bathrooms run at once, whether laundry happens in the morning. A 40-gallon tank suits two people who shower at different times and fails a family of five who do not.
What the job has to get right
Venting to the manufacturer's specification for that unit, not the nearest convenient route. Seismic strapping in the upper and lower thirds, the lower strap at least four inches above the controls. The relief valve and its discharge piped to a safe point, never capped. A pan and drain where the location needs one. Gas or electrical supply checked against the new unit, including the breaker size on an electric change.
Tankless, if it fits
An on-demand unit frees the floor and never runs out within its capacity, but it needs a gas supply sized for its burner, its own vent specification and — on water this hard — a descaling routine. On a conversion, those get checked before a unit is chosen; if the gas line cannot support it, that is the answer, not a workaround.
The first days
Hot water should last as long as the sizing predicted, the relief valve should stay dry, and there should be no smell of gas at the connections. If something is off, raise it while the job is still recent.