The decision inside the job
Replacement in Pico starts with the same test as anywhere: is the tank itself gone, or is this a part? A split seam or a rusted base is the end — no valve fixes steel that has failed. A passing relief valve, a leaking drain valve, a failed thermocouple or a burnt element is repair work, and a replacement sold against one of those is a replacement nobody needed.
Once the shell has failed, the useful information is short: the unit's size, its fuel, where it sits and what the venting allows.
Why hard water pushes units to the end sooner
Alhambra's water measures 240 mg/L as calcium carbonate in the city's 2025 report, which is firmly hard. A tank that has never been flushed collects that mineral on its floor, so the burner heats scale before water and capacity quietly shrinks. By the time the shell goes, the unit has often been underperforming for a year or more.
That is also why a replacement is the moment to start a maintenance interval rather than inherit the old neglect.
What the job covers
Draining and disconnecting the old unit, removing it, setting the new one with its pan and drain where required, strapping it against earthquake movement, venting it to the manufacturer's specification, reconnecting gas or electrical supply against its requirements, and confirming it heats and shuts off cleanly.
Permitting and inspection apply to installation and replacement, so the requirement for the address is settled before the visit rather than after.
What not to do while it leaks
Close the cold inlet. Shut the gas valve or the breaker. Do not cap the relief valve to stop a drip, and do not leave a leaking tank above finished floor space while you decide. Water in a closet does more damage in a day than the replacement costs in parts.